|
Post by John Mcgovern on Mar 4, 2010 9:09:41 GMT
QUICK UPDATE GUIDE FOR THE LAUNCH C-READER V 1 - GO TO WWW.CRECORDER.COM2 - CLICK ON REGISTER (COMPLETE ALL DETAILS) 3 - THE SERIAL NUMBER OF THE UNIT IS ON THE PAGE 1 OF THE USERMANUAL 4 - RETURN TO HOME PAGE AND LOG IN WITH USERNAME AND PASSWORD YOU CREATED 5 - GO TO DOWNLOAD CENTRE 6 - CLICK ON C-READER V DOWNLOAD CENTER IN BLUE WRITING 7 - CLICK ON CREADER V UPGRADE PACKAGE V3.2 8 - CLICK ON SAVE AND SAVE TO DESK TOP ALLOW PROGRAM TO DOWNLOAD 9 - ON DESKTOP WILL NOW HAVE A ICON OF COMPUTER WITH CREADER-V 10 - CLICK ON ICON ON DESKTOP, CLICK RUN, I AGREE LICENSE (YOU DO NOT NEED TO PUT SERIAL NUMBER IN), CLICK NEXT, FILL IN NAME AND COMPANY, CLICK NEXT, THEN NEXT AGAIN AND NEXT AGAIN THEN FINISH. 11- CLICK START, CLICK PROGRAMS, HIGHLIGHT CREADER-V 12- CLICK ON RED BOX WITH CR INSIDE IT AND THE WORD LAUNCH BESIDE IT 13 - THE UPDATE TOOL WILL NOW APPEAR ON DESK TOP 14 - CONNECT C-READER TO COMPUTER WITH USB LEAD 15 - IT MAY SAY FOUND NEW HARDWARE FOLLOW THE INSTRUCTION 16 - CLICK ON START AND IT WILL START UPDATING 17 - IF HAVING PROBLEMS WE HAVE A DEFAULT USERNAME AND PASSWORD TO LOG ONTO THE WEBSITE WHICH WILL ALLOW YOU TO DOWNLOAD 18 - USERNAME ******** 19 - PASSWORD ******** 20 -THEN REPEAT FROM STEP 5
|
|
|
Post by creader on May 23, 2010 13:35:57 GMT
HI, I have a creader and i need to update it for Italian language, but i dont have a registration code, i buy t like this without, i downloaded the creader v2 for Italian language but when i connect the creader at the pc and launch the update it gives me failure to communicate i need to change the language for my husband that dont understand English heeeelp i dont know what else to do txs a lot
|
|
|
Post by John Mcgovern on May 23, 2010 17:00:32 GMT
you will need to contact who you bought the unit from.....
you should not have any problems updating the unit.
if you say you dont have the registration code, how did you get the V2 update ?
if this unit is a Chinese copy you will have problems updating it,
|
|
|
Post by creader on Jun 6, 2010 12:32:57 GMT
Hi txs for you reply, I bought he device from ebay and I took the v2 update from the internet from the official site, i've tried to install it but when I connect the device it tells me that it a failure to communicate
|
|
|
Post by John Mcgovern on Jun 6, 2010 16:07:10 GMT
if it cannot communicate check your usb devices in the pc for hardware errors
then contact your dealer who you got it from
|
|
|
Post by Sweden on Jan 11, 2011 19:37:34 GMT
I only get virus warning error... Files contains malware on downloadcenter for the Creader V....
I have Comodo firewall and virusprotection.. Is this something you know whats wrong ?
Thanks from sweden...
|
|
|
Post by John Mcgovern on Jan 11, 2011 20:22:11 GMT
i would try disabling the scanner for the file i have forwarded this message to china but i have had no other complain or notice for this he in the uk.. i have just done a website view check here www.siteadvisor.com/sites/crecorder.com
|
|
|
Post by Antonio on Apr 30, 2011 18:03:56 GMT
Hi, i'm italian. I bought the cReader on ebay, and i need the Italian language. I have the same problem of the Guest creader (post 2) because when i upgrade at the Version 3.23.00 he can't upgrade and he says Comunicated failed. I have the user manual, but i don't found any code, i search it but i don't found.. On the back of the cReader there is a Serial Number, but in the official site this Number is not correct. I use it for job, thanks for your answer.
|
|
|
Post by Marco Aurlio on May 17, 2011 23:46:43 GMT
I'm from brazil and bought creader on e-bay and I can't update the same, failure communication. That chinese copys can be updated or not? Thank you!
|
|
|
Post by ashz on Aug 6, 2015 4:38:10 GMT
Hi,I bought creader recently, but i can't use it on Audi A3,A4 Can you tell me why?
|
|